Replacement |
|
Take care not to bend or scratch the trim and panels. |
1. |
Remove the luggage side trim.
(Refer to Interior Trim - "Luggage Side Trim") |
2. |
Remove the second row seat belt upper anchor cover (A) using a screw driver or remover. |
3. |
Remove the second row seat belt upper anchor (A) after loosening the mounting bolts. |
4. |
Open the cap (B), then remove the rear pillar trim (C) after loosening the mounting bolts. |
5. |
Install in the reverse order of removal.
|
|
Take care not to bend or scratch the trim and panels. |
1. |
Remove the tailgate weatherstrip.
(Refer to Tailgate - "Tailgate Weatherstrip") |
2. |
Loosen the third row seat belt lower anchor mounting bolt . |
3. |
Open the cap (A), then remove the tailgate pillar trim (B) after loosening the mounting bolt. |
4. |
Install in the reverse order of removal.
|
Rear Hub - Carrier Repair procedures
Removal
1.
Remove the front wheel and tire (A) from front hub.
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to dama ...
Rear Evaporator Core Repair procedures
Replacement
1.
Remove the rear heater & A/C unit.
(Refer to Rear Heater - "Rear Heater Unit")
2.
Remove the rear heater & A/C lower case after loosening the screws.
3.
Remove the ...