Kia Optima Manuals

Kia Sedona: Rear Oil Seal Repair procedures - Cylinder Block - Engine Mechanical System - Kia Sedona YP Service ManualKia Sedona: Rear Oil Seal Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Mechanical System / Cylinder Block / Rear Oil Seal Repair procedures

Replacement
1.
Remove the transaxle assembly.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate.
(Refer to Cylinder Block - "Drive Plate")
3.
Remove the rear oil seal (A).

4.
Remove the rear oil seal case (A).

Installation
1.
Install the rear oil seal case (A).
Tightening torque :
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

   
•
Clean the sealing face before assembling two parts.
•
Remove harmful foreign materials on the sealing face before applying sealant
•
Before assembling rear oil seal case, the liquid sealant TB1217H should be applied to the rear oil seal case.
•
Parts must be assembled within 5 minutes after applying the sealant.
•
Apply sealant to the inner threads of the bolt holes.

2.
Using SST (09231-3C200, 09231-H1100), install the rear oil seal.

   
Do not reuse the rear oil seal.
3.
Install the other parts in the reverse order of removal.
Rear Oil Seal Components and Components Location
Components 1. Rear oil seal2. Oil seal case ...

Piston and Connecting Rod Components and Components Location
Components 1. Piston ring2. Piston pin3. Snap ring4. Piston5. Connecting rod6. Connecting rod upper bearing7. Connecting rod lower bearing8. Connecting rod bearing cap ...

Other Information:

Passive Occupant Detection System (PODS-F) Components and Components Location
Components ...

Press start button while turn steering (for smart key system)
This warning message illuminates if the steering wheel does not unlock normally when the Engine Start/Stop Button is pressed. It means that you should press the Engine Start/Stop Button whil ...

Categories


Copyright © www.kisedona.com 2016-2024