From front seat
Set the rear climate control selection (REAR ON) button to the ON position and turn the rear fan speed control (REAR) knob in the front climate control panel to the desired position.
To change the rear fan speed, turn the knob to the right for higher speed or left for lower speed.
From rear seat
Set the rear climate control selection (REAR ON) button in the front climate control panel to the ON position and set the rear climate control selection(REAR LOCK) button in the front climate control panel to the OFF position and press the rear fan speed control button on the rear control panel to the desired position.
To turn off the rear air conditioning system press the off button in the rear climate control panel.
Auto Head lamp leveling Unit Troubleshooting
Inspection with GDS
Initialization and diagnosis sequence by using GDS equipment.
The content below summarizes the procedure for A/S using GDS.
No.Procedure1Locate vehicle to flat plane2Tire ch ...
Fuel Tank Pressure Sensor (FTPS) Repair procedures
Inspection
1.
Connect the GDS to the Data Link Connector (DLC).
2.
Measure the output voltage of the FTPS.
Pressure [kPa (kgf/cmВІ, psi)]Output Voltage (V) [Ref=5V]-6.67 (-0.06, -0.97)0.502 ...