Replacement |
1. |
Remove the rear door trim.
(Refer to Rear Door - "Rear Door Trim") |
2. |
Disconnect the rear door cable (A). |
3. |
Disconnect the rear door remote controller connector (B). |
4. |
Loosen the bolts and remove the rear door remote controller (A). |
5. |
Loosen the screw and disconnect the rear door outside handle cable (A). |
6. |
Loosen the nuts (B) and remove the rear door front channel (A). |
7. |
Separate the fixed pin (B) and remove the rear door outside handle cover (A). |
8. |
Separate plug hole (A) and then remove the bolt. |
9. |
Press the fixed pin and then remove the rear door outside handle base (A). |
10. |
Install in the reverse order of removal.
|
Placing a passenger seat belt into the auto lock mode
The auto lock mode will help prevent the normal movement of the child in the
vehicle from causing the seat belt to loosen and compromise the child restraint
system. To secure a child restraint s ...