Removal
1.
Remove the rear wheel and tire (A) from rear hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
Be careful not to damage ...
Other Information:
CVVT Oil Control Valve (OCV) Repair procedures
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the OCV connector.
3.
Measure resistance between the OCV terminals 1 and 2.
4.
Check that the resistance is within the specifi ...
Antenna Repair procedures
Removal
1.
Remove the roof trim assembly.
(Refer to Body - "Roof Trim Assembly")
2.
Disconnect the roof antenna connectors (A).
3.
Remove the roof antenna (A) after loosening a nut (B).
...