Replacement |
|
Take care not to bend or scratch the trim and panels. |
1. |
Remove the rear combination lamp cover (A) using a screwdriver or remover. |
2. |
After loosening the mounting screws, remove the rear combination lamp (A). |
3. |
Push the lock pin, then disconnet the rear combination lamp connector (A). |
4. |
Loosen the clips on rear bumper upper. |
5. |
Remove the rear mud guard (A) after loosening the screws. |
6. |
Remove the rear bumper side under cover (A) after loosening the mounting clips.
[LH]
[RH] |
7. |
Disconnect the rear bumper side.
|
8. |
Push the lock pin, then disconnect the rear bumper main connector (A). |
9. |
Remove the rear bumper cover (A). |
10. |
Install in the reverse order of removal.
|
Air bag
(1) Driver ...
Heated Oxygen Sensor (HO2S) Specifications
Specification
[Bank 1/Sensor 1]
ItemSpecificationHeater Resistance (Ω)3.3 ~ 4.1[20°C(68°F)]
[Bank 1/Sensor 2]
ItemSpecificationHeater Resistance (Ω)3.3 ~ 4.1[20°C(68°F)]
[Ba ...