Kia Optima Manuals

Kia Sedona: Rear Bumper beam Assembly Repair procedures - Rear Bumper - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Rear Bumper beam Assembly Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Rear Bumper / Rear Bumper beam Assembly Repair procedures

Replacement
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
   
Take care not to bend or scratch the trim and panels.
1.
Remove the rear bumper cover.
(Refer to Rear Bumper - "Rear Bumper Cover")
2.
Loosen the rear bumper under side mounting nuts.
[LH]

[RH]

3.
Loosen the rear bumper beam mounting bolts.
[LH]

[RH]

4.
Remove the rear bumper beam assembly (A).

5.
Install in the reverse order of removal.
   
•
Make sure that the connectors are plugged in properly.
•
Replace any damaged clips.
Rear Bumper beam Assembly Components and Components Location
Component Location 1. Rear Bumper Beam Assembly ...

Front Seat
...

Other Information:

Repair procedures
Removal 1. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner) 2. Remove the battery and battery tray. (Refer to Engine Electrical System - "Battery") 3. ...

Shift Cable Repair procedures
Removal 1. Move the shift lever to "N" range. 2. Remove the air cleaner assembly. (Refer to Engine Mechanical System - "Air Cleaner) 3. Remove the battery and battery tray. (Refer to Eng ...

Categories


Copyright © www.kisedona.com 2016-2024