Inspection |
1. |
Connect the battery voltage and check the blower motor rotation. |
2. |
If the blower motor does not operate well, substitute with a known-good blower motor and check for proper operation. |
3. |
Replace the blower motor if it is proved that there is a problem with it. |
Replacement |
1. |
Disconnect the battery negative terminal. |
2. |
Remove the luggage side trim [RH].
(Refer to Body - "Luggage Side Trim") |
3. |
Remove the rear heater duct (A) after loosening the bolts. |
4. |
Disconnect the blower motor connector (A) and then remove the blower motor (B) after loosening the screws. |
5. |
Install in the reverse order of removal. |
Engine compartment fuse panel
Engine compartment fuse panel
...
Rail Pressure Sensor (RPS) Description and Operation
Description
Rail Pressure Sensor (RPS), installed on the delivery pipe,
measures the instantaneous fuel pressure in the delivery pipe. The
sensing element (Semiconductor element) built in the s ...