Removal |
1. |
Remove the front wheel and tire (A) from front hub.
|
2. |
Remove the rear caliper assembly.
(Refer to Brake System - "Rear Disc Brake") |
3. |
Remove the parking brake cable.
(Refer to Brake System - "Parking Brake Assembly") |
4. |
Remove the rear Shock absorber bolt (A) and nut (B).
|
5. |
Loosen the nut and remove the rear shock absorber. |
6. |
Loosen the bolt and nut and then remove the rear assist arm (A) from the rear axle. |
7. |
Use the special tools (09568-4A000) to remove the assist arm from the knuckle. |
8. |
Support the lower arm (A) with jack. |
9. |
Remove the bolt (A) from the rear upper arm.
|
10. |
Remove the bolt (B) from the lower arm. |
11. |
Remove the wheel speed bracket bolt (A).
|
12. |
Loosen the bolt and remove the rear axle and trailing arm (A) on the vehicle body side member.
|
13. |
Install in the reverse order of removal.
|
14. |
Check the rear alignment.
(Refer to Suspension System - "Rear Alignment") |
Disassembly |
1. |
Remove the hub assembly mounting bolts (A-4ea) from the rear axle carrier (B).
|
2. |
Remove the hub assembly (C) and the parking brake assembly (B) from the rear axle carrier (A). |
3. |
Assemble in the reverse order of disassembly. |
Inspection |
1. |
Check the hub for cracks and the splines for wear. |
2. |
Check the rear axle carrier for cracks. |
Engine Coolant Temperature Gauge
This gauge indicates the temperature of the engine coolant when the ignition
switch or Engine Start/Stop button is ON.
If the gauge pointer moves beyond the normal range area toward the ...
Heating
1. Set the mode to the position.
2. Set the air intake control to the outside (fresh) air position.
3. Set the temperature control to the desired position.
4. Set the fan speed control to the desi ...