Kia Optima Manuals

Kia Sedona: Radiator Grill Repair procedures - Front Bumper - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Radiator Grill Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Bumper / Radiator Grill Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Remove the front bumper cover.
(Refer to Front Bumper - "Front Bumper Cover")
2.
Disconnect the wiring fixing fastener (A).

3.
Remove the front bumper energy absorber (B).

4.
Loosen the screws and remove the radiator mesh (A).

5.
Loosen the screws and remove the radiator grill (A) from the front bumper.

6.
Loosen the screws and remove the radiator grill (A).

7.
Install in the reverse order of removal.
   
Replace any damaged clips.
Radiator Grill Components and Components Location
Component Location 1. Radiator grill ...

Rear Bumper
...

Other Information:

Audio Unit Repair procedures
Removal 1. Disconnect the negative (-) battery terminal. 2. Remove the center fascia upper panel. (Refer to Body - "Center Fascia Panel") 3. Remove the audio head unit (A) after loosening ...

Easy access function
The system will move the driver's seat automatically as follows : Without smart key system - It will move the driver ...

Categories


Copyright © www.kisedona.com 2016-2024