Kia Sedona: Programming - Mirrors - Features of your vehicle - Kia Sedona YP Owners ManualKia Sedona: Programming

Third generation YP (2014-2024) / Kia Sedona YP Owners Manual / Features of your vehicle / Mirrors / Programming

Your vehicle may require the ignition switch to be turned to the ACC position for programming and/or operation of HomeLink. It is also recommended that a new battery be replaced in the hand-held transmitter of the device being programmed to HomeLink for quicker training and accurate transmission of the radiofrequency.

Follow these steps to train your HomeLink mirror:

1. When programming the buttons for the first time, press and hold the left and center buttons (,) simultaneously until the indicator light begins to flash after approximately 20 seconds. (This procedure erases the factory-set default codes. Do not perform this step when programming the additional HomeLink buttons.)

✽ NOTICE

For non rolling code garage door openers, follow steps 2 - 3.

For rolling code garage door openers, follow steps 2 - 6.

For Canadian Programming, please follow the Canadian Programming section.

For help with determining whether your garage door opener is nonrolling code or rolling code, please refer to the garage door openers owner

Electrochromic mirror with HomeLink system
To operate the electric rearview mirror Press the I button (1) to turn the automatic- dimming function on. The mirror indicator light will illuminate. Press the O button (2) to turn the automati ...

Rolling code programming
To train a garage door opener (or other rolling code equipped devices) with the rolling code feature, follow these instructions after completing the ...

Other Information:

Door Ajar Warning Light
This warning light illuminates : When a door is not closed securely. ...

Oil Pump Components and Components Location
Components Location 1. Automatic transaxle2. Oil pump assembly ...

Categories


Copyright В© www.kisedona.com 2016-2024