Inspection |
|
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the front door trim.
(Refer to Body - "Front Door Trim") |
3. |
Disconnect the motor connector from the motor. |
4. |
Connect the terminals No. 1 and No. 2 to battery boltage
(12V) and check that the motor operates smoothly when connected to the
following terminals:
[Safety window motor] |
5. |
Connect the motor terminals directly to battery voltage (12V)
and check that the motor operates smoothly. Next, reverse the polarity
and check that the motor operates smoothly in the reverse direction. If
the operation is abnormal, replace the motor.
[Standard window motor] |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the rear door trim.
(Refer to Body - "Rear Door Trim") |
3. |
Disconnect the motor connector from the motor. |
4. |
Connect the terminals No. 1 and No. 2 to battery boltage
(12V) and check that the motor operates smoothly when connected to the
following terminals:
[Safety window motor] |
5. |
Connect the motor terminals directly to battery voltage (12V)
and check that the motor operates smoothly. Next, reverse the polarity
and check that the motor operates smoothly in the reverse direction. If
the operation is abnormal, replace the motor.
[Standard window motor] |
Roof rack
If the vehicle has a roof rack, you can load cargo on top of your vehicle.
✽ NOTICE
If the vehicle is equipped with a sunroof, be sure not to position cargo onto
the roof rack in such a w ...
Components and Components Location
Component Location
1. Windshield wiper arm & blade2. Wiper & washer switch3. Windshield washer hose & nolzzle4. Washer reservoir5. Washer motor6. Washer fluid level sensor7. Wiper mot ...