Kia Sedona: Power Steering Pump, Belt and Hoses Repair procedures - Chassis - Maintenance - Kia Sedona YP Service ManualKia Sedona: Power Steering Pump, Belt and Hoses Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Maintenance / Chassis / Power Steering Pump, Belt and Hoses Repair procedures

Inspection
Power steering pump and hoses
Visually check for proper installation, chafing, cracks, deterioration and any leakage.
Replace any deteriorated or damaged parts immediately.
Power steering belt
Visually check the belt for excessive wear, frayed cords etc.
If any defect has been found, replace the drive belt.
Power Steering Fluid Repair procedures
Inspection Check that the power steering fluid is filled up to the level of MAX level mark on the reservoir. ...

Steering Gear Rack, Linkage and Boots Repair procedures
Inspection 1. Check the steering wheel free road. (1) Turn the steering wheel so that the front wheels are facing straight ahead. (2) Measure the distance where the steering wheel can be tur ...

Other Information:

Oil Pressure Switch Repair procedures
Removal and Installation 1. Remove the air duct. (Refer to Intake And Exhaust System - "Air Cleaner") 2. Remove the battery. (Refer to Engine Electrical System - "Battery") 3. Remove th ...

Ignition Coil Repair procedures
Removal Ignition coil (Cylinder #1) [Bank 1] 1. Remove the surge tank. (Refer to Engine Mechanical System - "Surge Tank") 2. Disconnect the Ignition coil connector (A). 3. Remove the i ...

Categories


Copyright В© www.kisedona.com 2016-2024