Removal |
1. |
Drain the power steering fluid. |
2. |
Remove the drive belt.
(Refer to Engine Mechanical System - "Drive Belt") |
3. |
Remove the pressure hose (B) from the oil pump and the suction hose from the suction pipe (C).
|
4. |
Loosen the mounting bolts (A) and then remove the power steering pump.
|
5. |
Install in the reverse order of removal. |
Installation |
1. |
Install in the reverse order of removal. |
2. |
Add power steering fluid to reservoir. |
3. |
Bleed the power steering system.
(Refer to General Information - "Repair procedures(Air bleeding)") |
Components and Components Location
Components
1. Piston ring2. Piston3. Connecting rod4. Connecting rod upper bearing5. Piston pin6. Connecting rod lower bearing7. Connecting rod bearing cap8. Baffle plate9. Upper oil pan10. Cylin ...
Components and Components Location
Component Location
1. Wi-Fi antenna (AVN Only)2. External amplifier3. Roof antenna4. AVN head unit (with UVO)5. UVO unit (UVO Audio Only)
...