Components |
No. | Connector A | Connector B | Connector C | Connector D |
1 | - | Detent Switch (Left side) | Clutch Return (Left side) | Logic battery |
2 | - | Child Safety Lock Switch (Left side) | Quad Sensor In1(Left side) | - |
3 | Pinch Return | Spare | Quad Sensor In2 (Right side) | Clutch Return (Right side) |
4 | Pinch Sensor (Left side) | Spare | Quad Sensor GND (Left side) | Unlatch (Left side) |
5 | Pinch Sensor (Right side) | Inside Handle Switch (Left side) [OP] | Clutch (Left side) | Unlatch (Right side) |
6 | Quad Sensor In2 (Right side) | Inside handle Switch (Left side) [CL] | Quad Sensor power supply (Left side) | Clutch (Right side) |
7 | Forkbolt Primary Switch (Right side) | Forkbolt Primary Switch (Left side) | Motor open (Left side) | High power battery |
8 | Detent Switch (Right side) | - | High power battery 2 | Motor open (Right side) |
9 | B CAN low | - | - | Earth |
10 | B CAN high | - | Motor closed (Left side) | Motor closed (Right side) |
11 | Quad Sensor Power supply (Right side) | - | ||
12 | Spare | Outside handle switch (Left side) | ||
13 | Child Safety Lock Switch (Right side) | |||
14 | Outside handle switch (Right side) | |||
15 | Vehicle speed signal | |||
16 | Quad Sensor In1 (Right side) | |||
17 | Quad Sensor GND (Right side) | |||
18 | Inside handle switch (Right side) [CL] | |||
19 | Spare | |||
20 | Inside handle switch (Right side) [OP] |
Head Lamps Components and Components Location
Components
1. Low beam bulb2. Low beam bulb socket3. Dust cap (Low)4. High beam bulb5. High beam bulb socket6. Dust cap (High)7. Turn signal lamp bulb8. Turn signal lamp socket9. Side marker lamp ...
Repair procedures
Removal
1.
Disconnect the negetive (-) battery terminal.
2.
Remove the tailgate back panel.
(Refer to Body - "Tailgate Back Panel")
3.
Remove the back view camera (A) after loosening the ...