Kia Optima Manuals

Kia Sedona: Power Seat Control Switch Repair procedures - Seat Electrical - Body Electrical System - Kia Sedona YP Service ManualKia Sedona: Power Seat Control Switch Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body Electrical System / Seat Electrical / Power Seat Control Switch Repair procedures

Inspection
Diagnosis With GDS
1.
The body electrical system can be quickly diagnosed for faulty parts using vehicle diagnostic system (GDS).
The diagnostic system (GDS) provides the following information:
(1)
Self diagnosis : Checking the failure code (DTC) and display
(2)
Current data : Checking the system input/output data state
(3)
Actuator test : Checking the system operation condition
(4)
Additional function : Other controlling such as he system option and zero point adjustment
2.
Select the ''Car model'' and the system to be checked in order to check the vehicle with the tester.
3.
Select the ''Power seat module (PSM)'' to check the power seat module (PSM).
4.
Select the ''Current Data" menu to search the current state of the input/output data.
The input/output data for the sensors corresponding to the power seat module (PSM) can be checked.
Seat Control Switch
1.
With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat switch.

[Manual seat control switch]

[Power seat control switch]
[4 Way]

[2 Way]

Removal
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front seat shield outer cover.
(Refer to Body - "Front Seat Shield Outer Cover")
3.
Remove the slide knob (A) and height knob (B).

4.
Remove the power seat control switch (A) after loosening the screws.

Installation
1.
Install the power seat control switch.
2.
Install the slide knob and height knob.
3.
Install the front seat shield outer cover.
4.
Connect the negative (-) battery terminal.
Power Seat Control Switch Schematic Diagrams
Circuit Diagram ...

Seat Heater Components and Components Location
Components ...

Other Information:

Automatic transaxle
Depress the brake pedal and the lock release button when shifting. (If the shift lock system is not equipped, it is not necessary to depress the brake pedal. However, it is recommended to depre ...

Specifications
Specifications AVN Head Unit ItemSpecificationPower supplyDC 14.4V Negative groundTuning typePLL SYNTHESIZED TUNINGLoad impedance2Ω x 4 (Front/Rear/Woofer)4Ω x 2 (Tweeter)Antenna80PF 75ΩDa ...

Categories


Copyright © www.kisedona.com 2016-2024