Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Detach the personal lamp (A) using a flat-tip screwdriver. |
3. |
Disconnect the personal lamp connector (A). |
Installation |
1. |
Connect the personal lamp connector. |
2. |
Install the personal lamp. |
3. |
Connect the negative (-) battery terminal. |
Rail Pressure Sensor (RPS) Specifications
Specification
Pressure [MPa (kgf/cm², psi)]Output Voltage (V) [Ref=5V]0 (0, 0)0.510 (102, 1450)2.520 (204, 2900)4.5
...
Side Impact Sensor (SIS) Repair procedures
Removal
Pressure Side Impact Sensor (P-SIS)
•
Removal of the airbag must be performed according to the precautions/procedures described previously.
•
...