Inspection |
1. |
Turn ignition switch OFF. |
2. |
Remove the battery and battery tray.
(Refer to Engine Electrical System - "Battery") |
3. |
Disconnect the solenoid valve connector (A). |
4. |
Measure the resistance between power terminal (10) and signal terminal (7).
|
Replacement |
If a solenoid valve of VFS type needs to be replaced, the
valve body assembly should be replaced and the oil pressure should be
adjusted. If the solenoid valve is replaced individually, it is not
possible to adjust the oil pressure without additional equipment, and if
the oil pressure adjustment procedure is not performed, a shift shock
or delay may occur. |
1. |
Replace the valve body assembly.
(Refer to Hydraulic System - "Valve Body") |
Sunroof Sunshade Repair procedures
Replacement
[Front]
1.
Remove the sunroof assembly.
(Refer to Sunroof - "Sunroof Assembly")
2.
Loosen the mounting screws and remove the sunshade stoper (A).
3.
Loosen the nuts and re ...
Battery Description and Operation
Description
1.
The CMF(Closed Maintenance Free) battery is, as the name
implies, totally maintenance free and has no removable battery cell
caps.
2.
The CMF(Closed Maintenance Free) batter ...