Replacement |
|
1. |
Using a screwdriver or remover, remove the front door quadrant inner cover (A). |
2. |
Loosen the outside rear view mirror mounting bolts & screw (A). |
3. |
Remove the outside rear view mirror (A) after disconnecting the outside rear view mirror connector (B). |
4. |
Install in the reverse order of removal.
|
Rear Pillar Trim Components and Components Location
Component Location
1. Rear pillar trim
...
Compressor Repair procedures
Removal
1.
If the compressor is marginally operable, run the engine at
idle speed, and let the air conditioning work for a few minutes, then
shut the engine off.
2.
Disconnect the negative ...