Removal and Installation |
1. |
Remove the engine cover.
(Refer to Engine And Transaxle Assembly - "Engine Cover") |
2. |
Remove the air duct.
(Refer to Intake And Exhaust System - "Air Cleaner") |
3. |
Remove the battery.
(Refer to Engine Electrical System - "Battery") |
4. |
Remove the air cleaner assembly.
(Refer to Intake And Exhaust System - "Air Cleaner") |
5. |
Remove the engine room under cover.
(Refer to Engine And Transaxle Assembly - "Engine Room Under Cover") |
6. |
Drain the coolant.
(Refer to Cooling System - "Coolant") |
7. |
Drain engine oil.
(Refer to Lubrication System - "Engine Oil") |
8. |
Remove the water temperature control assembly.
(Refer to Cooling System - "Water Temperature Control Assembly") |
9. |
Remove the surge tank.
(Refer to Intake And Exhaust System - "Surge Tank") |
10. |
Remove the intake manifold.
(Refer to Intake And Exhaust System - "Intake Manifold") |
11. |
Remove the water center pipe.
(Refer to Cooling System - "Water Temperature Control Assembly") |
12. |
Remove the oil filter body (A).
|
13. |
Install in the reverse order of removal. |
14. |
Start engine and check for oil leaks. |
15. |
Recheck the engine oil level. |
12,000 km (7,500 miles) or 6 months
❑ Rotate tire
❑ Inspect battery condition
❑ Inspect air cleaner filter
❑ Inspect vacuum hose
❑ Inspect power steering fluid (if equipped)
❑ Inspect power ...
216,000 km (135,000 miles) or 108 months
❑ Rotate tire
❑ Inspect battery condition
❑ Inspect air cleaner filter
❑ Inspect vacuum hose
❑ Inspect air conditioning refrigerant
❑ Inspect brake hoses ...