Kia Sedona: Multi Box Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Crash Pad / Multi Box Repair procedures

Replacement

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.

•	Take care not to bend or scratch the trim and panels.

Remove the multi box hole cap (A), and then loosen the screw to remove the multi box (B).

Replace any damaged clips.

Multi Box Components and Components Location

Component Location 1. Multi box ...

Steering Column Shroud Panel Components and Components Location

Component Location 1. Steering column shroud lower panel2. Steering column shroud upper panel ...

Other Information:

Rear Mode Control Actuator Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the mode control actuator connector. 3. Verify that the mode control actuator operates to the defrost mode when 12V is connected t ...

Front Door Module Repair procedures
Replacement 1. Remove the front door window glass. (Refer to Front Door - "Front Door Window Glass") 2. Remove the front door outside handle. (Refer to Front Door - "Front Door Outside Hand ...

Kia Sedona: Multi Box Repair procedures

Multi Box Components and Components Location

Steering Column Shroud Panel Components and Components Location

Other Information:

Categories