1. Turn the ignition switch to the ON position.
2. Turn the fan speed control knob to the OFF (0) position.
3. Turn the mode selection knob to the defrost position ().
4. Push the air intake control button () at least 5 times within 3 seconds.
If the battery has been discharged or disconnected, it resets to the defog logic status.
Special Service Tools
Special Service Tools
Tool Name / NumberIIIustrationDescriptionSteering wheel puller09561-11001Used for removing steering wheelOil pressure gauge09572-21000Used for measuring of oil pressure(Use ...
Repair procedures
Replacement
1.
Remove the cap (A), the nuts and the wiper arm (B).
Tightening torque :
22.6 ~ 26.5 N.m(2.3 ~ 2.7 kgf.m, 16.6 ~ 19.5 lb-ft)
2.
Disconnect the cowl top cover nozzle hose (A ...