Integrated into the Barometric Pressure Sensor (BPS), the
Intake Air Temperature Sensor (IATS) detects the intake air temperature.
To calculate precise air quantity, correction of the air
temperature is needed because air density varies according to the
temperature. So the ECM uses not only BPS signal but also IATS signal.
This sensor has a Negative Temperature Coefficient (NTC) thermistor and
it''s resistance changes in reverse proportion to the temperature.
Troubleshooting
Troubleshooting
Limp Home Mode
Features a fail-safe function that prevents dangerous
situations in the event of a transaxle failure.The vehicle will be
driven in limp home mode if the transa ...
To increase cruise control set speed
Follow either of these procedures:
Move the lever up (to RES+), and hold it. Your vehicle set speed will increase
by 10 km/h (5 mph). Release the lever at the speed you want.
Move the lever ...