Kia Sedona: Intake Actuator Description and Operation
The intake actuator is located at the blower unit. It
regulates the intake door by a signal from the control unit. Pressing
the intake selection switch will shift between recirculation and fresh
air modes.
Replacement
1.
Disconnect the stopper (B) from the glove box (A).
2.
Disconnect the air damper (A) from the glove box (B).
3.
Remove the filter cover (A) by pressing the knob.
4.
Repla ...
Inspection
1.
Turn the ignition switch OFF.
2.
Disconnect the intake actuator connector.
3.
Verify that the actuator operates to the recirculation position when 12V is connected to termina ...
Other Information:
Reducing the risk of a rollover
This multi-purpose passenger vehicle is defined as a Crossover Utility Vehicle
(CUV). CUV ...
Don't let ice and snow accumulate underneath
Under some conditions, snow and ice can build up under the fenders and interfere
with the steering. When driving in severe winter conditions where this may happen,
you should periodically check un ...