Type A
Type B
1. Open the tailgate.
2. Remove the service cover.
3. Remove the socket from the assembly by turning the socket counterclockwise until the tabs on the socket align with the slots on the assembly.
4. Remove the bulb from the socket by pressing it in and rotating it counterclockwise until the tabs on the bulb align with the slots in the socket. Pull the bulb out of the socket.
5. Insert a new bulb by inserting it into the socket and rotating it until it locks into place.
6. Install the socket in the assembly by aligning the tabs on the socket with the slots in the assembly. Push the socket into the assembly and turn the socket clockwise.
7. Install the service cover by putting it into the service hole.
* If your vehicle is equipped with LED type stop and tail lights replace with LED assembled units. Please contact an authorized Kia dealer.
Specifications
Specification
Ignition System
Ignition Coil
ItemSpecificationRated Voltage (V)12Operating Voltage (V)5 ~ 16Primary Coil Resistance (Ω)0.62 ± 10% [20°C (68°F)]Secondary Coil Resistance ...
Special Service Tools
Special Service Tools
Tool Name / NumberIllustrationDescriptionBand installer09495-3K000Installation of ear type boot bandBall joint puller09568-4A000Remove the ball jointPuller09495-33000Removal ...