Kia Sedona: Injector Drive Box (IDB) Repair procedures - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Injector Drive Box (IDB) Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Injector Drive Box (IDB) Repair procedures

Removal
1.
Turn the ignition switch off and disconnect the battery negative (-) Terminal.
2.
Remove the mounting nuts (A) and disconnect the connector (B), and then remove the injector drive box.

Installation
1.
Install in the reverse order of removal.

IDB mounting nut:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m, 7.2 ~ 8.7 lb-ft)

Injector Drive Box (IDB) Schematic Diagrams
IDB terminal and In/Output IDB terminal function Connector [E09] Pin No.DescriptionConnected to1- 2- 3- 4- 5- 6- 7- 8- 9- 10- 11- 12- 13- 14- 15- 16Injector (Cyl ...

ETC (Electronic Throttle Control) System Specifications
Specification [Throttle Position Sensor (TPS)] Throttle angle(°)Output Voltage (V) [Ref=5V]TPS1TPS200.54.5100.964.05201.413.59301.873.14402.322.68502.782.23603.231.77703.691.32804.140.86904.60. ...

Other Information:

Rear Disc Brake Repair procedures
Removal 1. Remove the rear wheel & tire. Tightening torque: 88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft) 2. Remove the rear shock absorber (A). (Refer to the Suspension g ...

KEY OUT indicator
When the ENGINE START/STOP button is in the ACC or ON position, if any door is open, the system checks for the smart key. If the smart key is not in the vehicle, the indicator will blink, and if ...

Categories


Copyright © www.kisedona.com 2016-2024