Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the driver''s seat assembly.
(Refer to Body - "Front Seat Assembly") |
3. |
Loosening the IMS unit mounting screws (A). |
4. |
Disconnect the IMS unit connectors (B) and then remove the IMS unit (A). |
Installation |
1. |
Connect the IMS unit connectors. |
2. |
Install the IMS unit. |
3. |
Install the driver''s seat assembly. |
4. |
Connect the negative (-) battery terminal. |
Crankshaft Position Sensor (CKPS) Repair procedures
Inspection
1.
Check the signal waveform of the CMPS and CKPS using the GDS.
Specification: Refer to “Wave Form”
Removal
1.
Turn the ignition switch OFF and disconnect the battery n ...
Components and Components Location
Component Location
1. Hands free call switch2. Mic3. Front left speaker4. Front right speaker5. Audio head unit & AVN head unit (hands free control)
※ There is no hands free jack. This s ...