Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Install the driver''s door trim.
(Refer to Body - "Front Door Trim") |
3. |
Remove the IMS switch (A) after loosening the screws. |
Installation |
1. |
Install the IMS switch. |
2. |
Install the driver''''s door trim. |
3. |
Connect the negative (-) battery terminal. |
Inspection |
1. |
Remove the memory power seat connector. |
2. |
When each switch is pressed, check the electricity flow
between memory power seat switch connector and grounding, and if the
electricity does not match the specification, replace the switch. |
Cooling System Repair procedures
Inspection
Radiator hoses
1.
Check radiator hoses for the following
(1)
Improper attachment
(2)
Leaks
(3)
Cracks
(4)
Damage
(5)
Loose connections
(6)
Chafing
(7)
Deterio ...
Rear Oil Seal Repair procedures
Replacement
1.
Remove the transaxle assembly.
(Refer to Automatic Transaxle System - "Automatic Transaxle")
2.
Remove the drive plate.
(Refer to Cylinder Block - "Drive Plate")
3.
Remov ...