Kia Sedona: Hood Latch Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Repair procedures

Replacement

1.	Loosen the fastener and remove the front bumper upper cover (A).

Remove the hood lower latch assembly (A) mounting bolts.

Tightening torque :

7.8 ~ 11.8N.m (0.8 ~ 1.2kgf.m, 5.8 ~ 8.7 lb-ft)

3.	Disconnect the hood latch release handle cable (A) and connector (B).

Install in the reverse order of removal.

•	Make sure that the hood latch release cable is connected properly.

•	Make sure that the hood locks/unlocks and opens/closes properly.

•	Adjust the latch alignment.

Hood Latch Components and Components Location

Component Location 1. Hood lower latch assembly ...

Tail Gate

...

Other Information:

Power windows
The ignition switch must be in the ON position for power windows to operate. Each door has a power window switch that controls the door's window. The driver has a power window lock button which ...

Rear Center Seat Belt Retractor Repair procedures
Replacement [Second row center seat belt retractor] When installing the belt, make sure not to damage the retractor. 1. Remove the roof trim assembly. (Refer t ...

Kia Sedona: Hood Latch Repair procedures

Hood Latch Components and Components Location

Tail Gate

Other Information:

Categories