Kia Optima Manuals

Kia Sedona: Hood Latch Release Handle Repair procedures - Hood - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Hood Latch Release Handle Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Release Handle Repair procedures

Replacement
1.
Using a screwdriver or remover, remove the hood release handle (A).
   
•
Use a 6mm hex bit to press the center until the handle easily pulls off the post.

2.
Install in the reverse order of removal.
   
•
Make sure that the hood latch cable is connected properly.
•
Make sure that the hood locks/unlocks and opens/closes properly.
Hood Latch Release Handle Components and Components Location
Component Location 1. Hood latch release handle ...

Hood Latch Components and Components Location
Component Location 1. Hood lower latch assembly ...

Other Information:

Repair procedures
Operation and Leakage Check Check all of the following items: ComponentProcedureBrake Booster (A)Check brake operation by applying the brakes during a test drive. If the brakes do not work p ...

Air conditioning
All Kia Air Conditioning Systems are filled with R-134a refrigerant. 1. Start the engine. Press the air conditioning button. 2. Set the mode to the position. 3. Set the air intake control to the o ...

Categories


Copyright © www.kisedona.com 2016-2024