Kia Sedona: Hood Assembly Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Hood / Hood Assembly Repair procedures

Replacement

•	Be careful not to damage the hood and body.

•	When removing and installing the hood, work in a group of two or more.

•	When removing the clips, use a clip remover.

After loosening the hood hinge (B) mounting bolts, remove the hood assembly (A).

Tightening torque :

21.6~26.5 N.m (2.2~2.7 kgf.m, 15.9~19.5 lb-ft)

Install in the reverse order of removal.

•	Make sure that the hood locks/unlocks and opens/closes properly.

•	Adjust the hood alignment.

Hood Assembly Components and Components Location

Component Location 1. Hood assembly ...

Hood Insulator Pad Repair procedures

Replacement 1. Using a clip remover, detach the clips, and remove the hood insulator pad (A). • Be careful not to scratch the hood panel. 2. Install ...

Other Information:

Specifications
Specification EngineJoint typeMax . Inner sideOuter sideInner sideOuter sideLambda 3.3UBJ#26VTJ#2650°23° Tightening Torques ItemsN.mkgf.mlb-ftFrontTire wheel hub nut88.3 ~ 107.99.0 ~ 11.0 ...

Rear Mud Guard Repair procedures
Replacement Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Kia Sedona: Hood Assembly Repair procedures

Hood Assembly Components and Components Location

Hood Insulator Pad Repair procedures

Other Information:

Categories