Kia Sedona: Heater & A/C Control Unit (Rear) Repair procedures
|
Put on gloves to protect your hands. |
|
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. |
|
•
|
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface. |
|
•
|
Take care not to bend or scratch the trim and panels. |
|
| 1. |
Using a screwdriver or ornament remover, remove the rear heater & A/C controller (A). 
|
| 2. |
Disconnect the rear heater & A/C controller connector (A). 
|
| 3. |
Install in the reverse order of removal.
|
Make sure that the connectors are plugged in properly. |
|
Components (1)
[Standard]
Connector Pin Function
Connector Pin NoFunctionA1BATT2ILL+ (TAIL)3MODE ACT''R F/B - REAR4MODE ACT''R (VENT) - REAR5MODE ACT''R (FLOOR) - REAR6TEMP ACT''R F/B - ...
Heater & A/C Control Unit (Rear) Components and Components Location