Kia Sedona: Glove Box Housing Repair procedures - Crash Pad - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Glove Box Housing Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Crash Pad / Glove Box Housing Repair procedures

Replacement
   
Put on gloves to protect your hands.
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Use a plastic panel removal tool to remove interior trim pieces to protect from marring the surface.
•
Take care not to bend or scratch the trim and panels.
1.
Disconnect the stopper (B) from the glove box (A).

2.
Disconnect the air damper (A) from the glove box (B).

3.
Using a screwdriver or remover, remove the crash pad side cover [RH] (A).

4.
After loosening the mounting screws and bolts, remove the glove box housing (A).

5.
Install in the reverse order of removal.
   
•
Make sure that the connectors are connected properly.
•
Replace any damaged clips.
Glove Box Housing Components and Components Location
Component Location 1. Glove box housing ...

Multi Box Components and Components Location
Component Location 1. Multi box ...

Other Information:

Timing Chain Cover Repair procedures
Removal     When removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be injury caused by leakage of high pressure fuel ...

To defrost outside windshield
1. Set the fan speed to the highest position. 2. Set the temperature to the extreme hot position. 3. Select the position. 4. The outside (fresh) air and air conditioning will be selected automat ...

Categories


Copyright © www.kisedona.com 2016-2024