Removal |
1. |
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - Repair Procedures - "Release Residual Pressure in Fuel Line") |
2. |
Turn the ignition switch OFF and disconnect the negative (-) battery terminal. |
3. |
Remove the second row seat LH
(Refer to Body - "Rear Seat Assembly") |
4. |
Open the floor mat (A). |
5. |
Remove the fuel pump service cover (A). |
6. |
Disconnect the fuel pump connector (A) and fuel tank pressure sensor (B). |
7. |
Lift the vehicle. |
8. |
Remove the under cover LH (A). |
9. |
Disconnect the fuel feed tube quick-connector (A) and vapor tube quick-connector (B). |
10. |
Disconnect the fuel filler hose (A), ventilation hose (B) and canister close valve connector (C). |
11. |
Support the fuel tank with jack (A). |
12. |
Remove the mounting bolts and fuel tank bands, and then remove the fuel tank (A). |
Installation |
1. |
Install in the reverse order of removal.
|
Mode selection
The mode selection button controls the direction of the air flow through the
ventilation system.
The air flow outlet port is converted as follows:
Refer to the illustration in the ...
Starter Specifications
Specification
Starter
ItemSpecificationRated voltage12 V, 1.7 kWThe number of pinion teeth12Performance[No-load, 11.5 V]AmpereMax.85 ASpeedMin. 2,550 rpm
...