Kia Sedona: Fuel Tank Air Filter Repair procedures - Evaporative Emission Control System - Emission Control System - Kia Sedona YP Service ManualKia Sedona: Fuel Tank Air Filter Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Emission Control System / Evaporative Emission Control System / Fuel Tank Air Filter Repair procedures

Removal
1.
Turn the ignition switch OFF and disconnect the battery negative (-) terminal.
2.
Lift the vehicle.
3.
Disconnect the canister close valve connector (A).
4.
Disconnect the ventilation hose (B) from the fuel tank air filter and canister close valve.
5.
Remove the canister close valve (C).

6.
Remove th fuel tank air filter (B) after loosening the mounting bolts (A).

Fuel tank air filter mounting bolt:
3.9 ~ 5.9 N.m (0.4 ~ 0.6 kgf.m, 2.9 ~ 4.3 lb-ft)

Installation
1.
Install in the reverse order of removal.
Fuel Filler Cap Description and Operation
Description A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which would seal the fuel filler. After the gasket on the fuel filler cap ...

Exhaust Emission Control System
...

Other Information:

High mounted stop lamp replacement
1. Open the tailgate. 2. Gently remove the center cover of the rear tailgate trim. 3. Disconnect the electrical connector. 4. Loosen the retaining nuts and remove the spoiler. 5. Remove the ...

Transaxle Oil Temperature Sensor Description and Operation
Description • The sensor used is a thermistor (NTC) in which resistance changes with temperature variation. • The TCM supplies about 5 voltage to the sensor; the output value ...

Categories


Copyright © www.kisedona.com 2016-2024