Kia Sedona: Fuel Pressure Regulator Repair procedures - Fuel Delivery System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Fuel Pressure Regulator Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Fuel Delivery System / Fuel Pressure Regulator Repair procedures

Removal
1.
Remove the fuel pump.
(Refer to Fuel Delivery System - “Fuel Pump”)
2.
Disconnect the fuel sender connector (A) and fuel pump connector (B).

3.
Remove the cushion pipe fixing clip (A), and then separate the head assembly (B) from reservoir cup.

4.
Remove the reservoir cup (B) after releasing the fixing hook (A).

5.
Disconnect the ground line (A).

6.
Remove the fuel pressure regulator after remove the fixing pin (A).

Installation
1.
Install in the reverse order of removal.
Fuel Sender Repair procedures
Removal 1. Remove the fuel pump. (Refer to Fuel Delivery System - “Fuel Pump”) 2. Disconnect the fuel sender connector (A). 3. Lift the fixing hook (B) by using a common driver, and ...

Filler-Neck Assembly Repair procedures
Removal 1. Open the fuel filler door and then remove the filler-neck mounting bolts (A). Filler-neck assembly mounting bolt: 7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft) 2. Left the ...

Other Information:

Comfort mode
The steering wheel becomes lighter. The comfort mode is usually used when driving in the city or when parking the vehicle. For your safety, if you press the steering mode button while operatin ...

Description
On this mode, you can change setting of the doors, lights, and so on. ...

Categories


Copyright © www.kisedona.com 2016-2024