Kia Sedona: Fuel Pressure Control Valve (FPCV) Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: Fuel Pressure Control Valve (FPCV) Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / Fuel Pressure Control Valve (FPCV) Specifications

Specification
Item
Specification
Coil Resistance (Ω)
1.04 ~ 1.27 [23°C(73.4°F)]

Variable Intake Solenoid (VIS) Valve Repair procedures
Inspection 1. Turn the ignition switch OFF. 2. Disconnect the VIS valve connector. 3. Measure resistance between the VIS valve terminals 1 and 2. 4. Check that the resistance is within ...

Fuel Pressure Control Valve (FPCV) Description and Operation
Description Fuel Pressure Control Valve, installed on the high pressure fuel pump, controls fuel flow into the injectors in accordance with the ECM signal calculated based on various engine con ...

Other Information:

Sunroof Inside Air Recirculation
When the heater or air conditioning system is on with the sunroof opened, the outside (fresh) air position will be automatically selected. At this time, if you press the recirculated air position ...

Barometric Pressure Sensor (BPS) Specifications
Specification Pressure [kPa (kgf/cm², psi)]Output Voltage (V) [Ref=5V]10.0 (0.01, 0.15)0.5055.0 (0.56, 7.98)2.21115.0 (1.17, 16.9)4.50 ...

Categories


Copyright © www.kisedona.com 2016-2024