Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the crash pad lower panel.
(Refer to Body - "Crash Pad Lower Panel") |
3. |
Remove the fuel filler door open switch (A) after pushing the hooks inside. |
Installation |
1. |
Install the fuel filler door open switch. |
2. |
Install the crash pad lower panel. |
3. |
Connect the negative (-) battery terminal. |
Inspection |
1. |
Check the switch for continuity between the No. 1 and No. 6
terminals. If the continuity is not as specified, replace the fuel
filler door open switch. |
The LDWS does not operate when
The driver turns on the turn signal or the hazard warning flasher to change
lane.
Driving on the lane line.
✽ NOTICE
To change lanes, operate the turn signal switch then change the ...
Crankshaft Repair procedures
Disassembly
•
Use fender covers to avoid damaging painted surfaces.
•
To avoid damage, unplug the wiring connectors carefully while holding the con ...