Kia Optima Manuals

Kia Sedona: Front Wheel Speed Sensor Repair procedures - ESC(Electronic Stability Control) System - Brake System - Kia Sedona YP Service ManualKia Sedona: Front Wheel Speed Sensor Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Brake System / ESC(Electronic Stability Control) System / Front Wheel Speed Sensor Repair procedures

Removal
1.
Remove the front wheel and tire.
Tightening torque:
88.3 ~ 107.9 N.m (9.0 ~ 11.0 kgf.m, 65.1 ~ 79.6 lb-ft)
2.
Remove the front wheel speed sensor mounting bolt (A).
Tightening torque:
6.9 ~ 10.8 N.m (0.7 ~ 1.1 kgf.m, 5.1 ~ 7.6 lb-ft)

3.
Remove the front wheel guard .
4.
Remove the front wheel speed sensor cable mounting bolt (A).

5.
Disconnect the front wheel speed sensor connector (B) and then remove the front wheel speed sensor.

6.
Install in the reverse order of removal.
Front Wheel Speed Sensor Components and Components Location
Components 1. Front wheel speed sensor2. Front wheel speed sensor connector ...

Rear Wheel Speed Sensor Components and Components Location
Components 1. Rear wheel speed sensor 2. Rear wheel speed sensor cable ...

Other Information:

Oil Pump Components and Components Location
Components Location 1. Automatic transaxle2. Oil pump assembly ...

Press start button again (for smart key system)
This warning message illuminates if you can not operate the Engine Start/Stop Button when there is a problem with the Engine Start/Stop Button system. It means that you could start the engin ...

Categories


Copyright В© www.kisedona.com 2016-2024