Kia Sedona: Front Wheel Guard Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Body Side Moulding / Front Wheel Guard Repair procedures

Replacement

Put on gloves to protect your hands.

•	When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.

•	Take care not to scratch the body surface.

1.	Remove the front tire.

2.	Remove the front mud guard. (Refer to Body Side Moulding - "Front Mud Guard")

3.	After loosening the mounting clips and screws, remove the front wheel guard (A).

Install in the reverse order of removal.

Replace any damaged clips.

Rear Spoiler Repair procedures

Replacement Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Rear Wheel Guard Repair procedures

Replacement Put on gloves to protect your hands. • When prying with a flat-tip screwdriver, wrap it with protective tape, an ...

Other Information:

Windshield Deicer Repair procedures
Inspection 1. Remove the cowl top cover. (Refer to Body - "Cowl Top Cover") 2. Disconnect the windshield deicer connector (A). 3. Check for continuity between the terminals of deicer line ...

Closing the hood
1. Before closing the hood, check the following: All filler caps in the engine compartment must be correctly installed. Gloves, rags or any other combustible material must be removed from the ...

Kia Sedona: Front Wheel Guard Repair procedures

Rear Spoiler Repair procedures

Rear Wheel Guard Repair procedures

Other Information:

Categories