Kia Sedona: Front Seat Shield Outer Cover Repair procedures
[Front seat shield front cover]
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put on gloves to protect your hands.
1.
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly")
2.
After loosening the mounting screws, remove the front seat shield front cover (A).
3.
Install in the reverse order of removal.
Replace any damaged clips.
[Front seat shield outer cover]
•
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage.
•
Put on gloves to protect your hands.
1.
Remove the front seat shield front cover.
2.
After loosening the mounting screw, remove the front seat shield outer cover (A).
3.
Push the lock pin, then disconnect the front seat power switch connector (A).
4.
Install in the reverse order of removal.
•
Make sure that the connectors are plugged in properly.
•
Replace any damaged clips.
Component Location
1. Front seat shield front cover2. Front seat shield outer cover
...
Component Location
1. Front seat shield inner cover
...
Other Information: Defroster
CAUTION - Conductors
To prevent damage to the conductors bonded to the inside surface of the rear
window, never use sharp instruments or window cleaners containing abrasives to clean
the wind ...
Vanity mirror lamp
Opening the lid of the vanity mirror will automatically turn on the mirror light. ...