Kia Sedona: Front Seat Back Cover Repair procedures
•
|
When prying with a flat-tip screwdriver, wrap it with
protective tape, and apply protective tape around the related parts, to
prevent damage. |
•
|
Put on gloves to protect your hands. |
|
1. |
Remove the front seat assembly.
(Refer to Front Seat - "Front Seat Assembly") |
2. |
Remove the front seat shield outer cover.
(Refer to Front Seat - "Front Seat Shield Outer Cover") |
3. |
Remove the front seat shield inner cover.
(Refer to Front Seat - "Front Seat Shield Inner Cover") |
4. |
Push the lock pin (B) and then pull out the front seat headrest (A). |
5. |
Push the lock pins (B) from the front seat back board (A), then remove the back board.
•
|
Using a flat head screwdriver, push the center of the clip. |
•
|
Be careful not to damage the lock pins. |
|
|
6. |
Remove the front seat lower protector (A). |
7. |
Push the lock pin, then disconnect the front seat back duct lower (A). |
8. |
Remove the front seat back duct (A) after loosening the mounting screws. |
9. |
Disconnect the front seat lower connectors (A). |
10. |
Disconnect the fixing hook (A) from the front seat back lower. |
11. |
Disconnect the protector (A) from the front seat back frame. |
12. |
Turn the front seat back cover inside out. Then pull out the
headrest guides (A) while pinching both sides of the lower part of the
guides. |
13. |
Remove the front seat back cover (A) from the front seat back frame. |
14. |
After removing the velcro tape (A) and hog-ring clips (C) on the front of seat back, remove the front seat back cover (B). |
15. |
Install in the reverse order of removal.
•
|
Make sure that the connectors are plugged in properly. |
•
|
Replace any damaged clips. |
•
|
To prevent wrinkles, make sure that the material is stretched evenly over the cover (B) before securing the hog-ring clips (A). |
•
|
Replace the hog-ring clips with new ones using special tool [09880-4F000]. |
|
|
Component Location
1. Front seat back cover
...
Component Location
1. Front seat cushion cover
...