Kia Sedona: Front Pillar Trim Repair procedures - Interior Trim - Body (Interior and Exterior) - Kia Sedona YP Service ManualKia Sedona: Front Pillar Trim Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Interior Trim / Front Pillar Trim Repair procedures

Replacement
   
•
When prying with a flat-tip screwdriver, wrap it with protective tape, and apply protective tape around the related parts, to prevent damage.
•
Put on gloves to protect your hands.
   
Take care not to bend or scratch the trim and panels.
1.
Remove the front door body side weatherstrip.
2.
Remove the front pillar trim (A) using a screwdriver or remover.

3.
Install in the reverse order of removal.
   
Replace any damaged clips.
Front Pillar Trim Components and Components Location
Component Location 1. Front pillar trim ...

Center Pillar Trim Components and Components Location
Component Location 1. Center pillar lower trim2. Center pillar upper trim ...

Other Information:

Air bag collision sensors
(1) SRS control module/ Rollover sensor (2) Front impact sensor (3) Side impact sensor (4) Side pressure sensor WARNING - Air bag sensors Do not hit or allow any objects to impact the lo ...

Audio Remote Control Schematic Diagrams
Circuit Diagram ...

Categories


Copyright © www.kisedona.com 2016-2024