Kia Sedona: Front Impact Sensor (FIS) Description and Operation
The Front Impact Sensors (FIS) are installed in the Front End
Module (FEM). These remote sensors are used to detect acceleration due
to a collision at the mounting location. The primary purpose of the
Front Impact Sensor (FIS) is to provide an indication of a collision.
The Front Impact Sensor (FIS) sends acceleration data to the SRSCM.
Removal
1.
Remove the ignition key from the vehicle.
2.
Disconnect the battery negative cable and wait for at least thirty seconds before beginning work.
3.
Remove the floor console.
(Re ...
Other Information:
Fluid Components and Components Location
Components Location
1. ATF filler hole (eyebolt)2. ATF level plug3. ATF drain plug
...
Checking tire inflation pressure
Check your tires once a month or more.
Also, check the tire pressure of the spare tire.
How to check
Use a good quality gauge to check tire pressure. You cannot tell if your tires
are properly in ...