Kia Sedona: Front Impact Sensor (FIS) Components and Components Location - SRSCM - Restraint - Kia Sedona YP Service ManualKia Sedona: Front Impact Sensor (FIS) Components and Components Location

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Restraint / SRSCM / Front Impact Sensor (FIS) Components and Components Location

Components

Front Impact Sensor (FIS) Description and Operation
Description The Front Impact Sensors (FIS) are installed in the Front End Module (FEM). These remote sensors are used to detect acceleration due to a collision at the mounting location. The pri ...

Front Impact Sensor (FIS) Repair procedures
Removal     • Removal of the airbag must be performed according to the precautions/ procedures described previously. • Before disconnecting the front i ...

Other Information:

Power Steering Pump, Belt and Hoses Repair procedures
Inspection Power steering pump and hoses Visually check for proper installation, chafing, cracks, deterioration and any leakage. Replace any deteriorated or damaged parts immediately. Power ste ...

Steering Column and Shaft Repair procedures
Removal 1. Disconnect the battery negative cable from the battery and then wait for at least 30 seconds. 2. Turn the steering wheel so that the front wheels can face straight ahead. 3. Rem ...

Categories


Copyright © www.kisedona.com 2016-2024