Kia Sedona: Front Door Outside Handle Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Door / Front Door Outside Handle Repair procedures

Replacement

1.	Remove the hole plug (A).

After loosening the mounting bolt, remove the front door outside handle cover (B).

Tightening torque :

7.8 ~ 11.8 N.m (0.8 ~ 1.2 kgf.m, 5.8 ~ 8.7 lb-ft)

3.	Remove the front door outside handle (A) by sliding it backward.

4.	Disconnect the front door outside handle connector (A).

Install in the reverse order of removal.

•	Be sure to install the outside handle pad (A) between the outside handle and the door panel.

•	Make sure that the connectors are connected properly.

•	Make sure that the door locks/unlocks and opens/closes properly.

Front Door Outside Handle Components and Components Location

Component Location 1. Front door outside handle ...

Front Door Latch Components and Components Location

Component Location 1. Front door latch ...

Other Information:

Washer Fluid Warning Light
This warning light illuminates : ...

Auto Head lamp leveling Unit Troubleshooting
Inspection with GDS Initialization and diagnosis sequence by using GDS equipment. The content below summarizes the procedure for A/S using GDS. No.Procedure1Locate vehicle to flat plane2Tire ch ...

Kia Sedona: Front Door Outside Handle Repair procedures

Front Door Outside Handle Components and Components Location

Front Door Latch Components and Components Location

Other Information:

Categories