Kia Sedona: Front Door Belt Inside Weatherstrip Repair procedures

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Body (Interior and Exterior) / Front Door / Front Door Belt Inside Weatherstrip Repair procedures

Front Door Belt Outside Weatherstrip Repair procedures

Replacement 1. Pull down front door window glass by pressing the power window glass switch. 2. After loosening the mounting screws, remove the front door belt outside weatherstrip (A). 3. ...

Front Door Side Weatherstrip Repair procedures

Replacement 1. Loosen the front door checker (B) mounting bolt. Tightening torque : 19.6 ~ 29.4 N.m (2.0 ~ 3.0 kgf.m,14.5 ~ 21.7 lb-ft) 2. Detach the clips, and then remove the front doo ...

Other Information:

Auto Defogging Sensor (DATC only) Description and Operation
Description The auto defogging sensor is installed on the front window glass. The sensor judges and sends signal to blow out wind for defogging if moisture occurs. On receiving the signal from ...

Components and Components Location
Components 1. Windshield glass 2. Windshield glass moulding ...