Removal |
1. |
Disconnect the negative (-) battery terminal. |
2. |
Remove the main crash pad assembly.
(Refer to Body - "Main Crash Pad Assembly") |
3. |
Remove the body control module.
(Refer to "BCM (Body Control Module)") |
4. |
Disconnect the external amplifier connector (A). |
5. |
Remove the external amplifier (A) after loosening the nuts.
|
Installation |
1. |
Install the external amplifier. |
2. |
Connect the external amplifier connector. |
3. |
Install the BCM (Body Conetrol Module). |
4. |
Install the main crash pad assembly. |
5. |
Connect the negative (-) battery terminal.
|
Keep paint and trim in good condition
Scratches or chips in the finish should be covered with "touch-up" paint as soon
as possible to reduce the possibility of corrosion. If bare metal is showing through,
the attention of a ...
Power Seat Control Switch Repair procedures
Inspection
Diagnosis With GDS
1.
The body electrical system can be quickly diagnosed for faulty parts using vehicle diagnostic system (GDS).
The diagnostic system (GDS) provides the following in ...