Kia Optima Manuals

Kia Sedona: ETC (Electronic Throttle Control) System Specifications - Engine Control System - Engine Control / Fuel System - Kia Sedona YP Service ManualKia Sedona: ETC (Electronic Throttle Control) System Specifications

Third generation YP (2014-2024) / Kia Sedona YP Service Manual / Engine Control / Fuel System / Engine Control System / ETC (Electronic Throttle Control) System Specifications

Specification
[Throttle Position Sensor (TPS)]
Throttle angle(°)
Output Voltage (V) [Ref=5V]
TPS1
TPS2
0
0.5
4.5
10
0.96
4.05
20
1.41
3.59
30
1.87
3.14
40
2.32
2.68
50
2.78
2.23
60
3.23
1.77
70
3.69
1.32
80
4.14
0.86
90
4.6
0.41
98
4.65
0.35
C.T (0)
0.5
4.5
W.O.T (86)
4.41
0.59

[ETC Motor]
Item
Specification
Coil Resistance (Ω)
0.3 ~100 [20°C(68°F)]

Injector Drive Box (IDB) Repair procedures
Removal 1. Turn the ignition switch off and disconnect the battery negative (-) Terminal. 2. Remove the mounting nuts (A) and disconnect the connector (B), and then remove the injector drive b ...

ETC (Electronic Throttle Control) System Description and Operation
Description The Electronic Throttle Control (ETC) System consists of a throttle body with an integrated control motor and throttle position sensor (TPS). Instead of the traditional throttle cab ...

Other Information:

Lane changing
A vehicle which moves into your lane from an adjacent lane cannot be recognized by the sensor until it is in the sensor's detection range. The sensor may not detect immediately when a ve ...

Accelerator Position Sensor (APS) Description and Operation
Description Accelerator Position Sensor (APS), installed on the accelerator pedal module, detects the rotation angle of the accelerator pedal. The APS, one of the most important sensors in engi ...

Categories


Copyright © www.kisedona.com 2016-2024