Removal |
1. |
Turn the ignition switch OFF. |
2. |
Remove the brake fluid from the master cylinder reservoir with a syringe.
|
3. |
Pull up the lock of the HECU connector (A) and then disconnect the connector. |
4. |
Disconnect the brake tubes from the HECU by unlocking the nuts counterclockwise with a wrench.
|
5. |
Loosen the HECU bracket nuts (A) and then remove HECU and bracket.
|
6. |
Remove the bolts and then remove the bracket from HECU.
|
Installation |
1. |
Install in the reverse order of removal. |
2. |
Tighten the HECU mounting bolts and nuts to the specified torque. |
3. |
After installation, bleed the brake system.
(Refer to Brake system - "Brake system Bleeding") |
Weight of the trailer tongue
The tongue load of any trailer is an important weight to measure because it affects
the total gross vehicle weight (GVW) of your vehicle. This weight includes the curb
weight of the vehicle, any ...
Components and Components Location
Components
1. Front seat center side cover [LH]2. Front seat cushion vent mat [LH]3. Front seat cushion pad assembly [LH]4. Front seat cushion cover assembly [LH]5. Front seat cushion frame assem ...